cart Shopping Cart    You have 0 items   
WP2P Wireless Point to Point Low Power Pair
larger imageMove mouse over the image to magnify

WP2P Wireless Point to Point Low Power Pair

Wireless Point to Point Low Power Pair
NZ $750.00
excl GST
Our new Low Power Wireless Point to Point has superseded our original and top selling WP2P.  

The changes made to the Low Power WP2P provide for more versatile operation and use.  These include:
  • The new Low Power WP2P consumes less than 1/10th of the power consumed by the previous version.  This makes the new Low Power version much more suitable for use in Solar Powered applications.
  • The New Low Power WP2P has provision to select whether the outputs are held in their current state or are reset to the OFF state under fault conditions. 
  • The new Low Power WP2P now has an extended operating power supply voltage of 6 – 24 volts.  Previously this was fixed at 12 volts.
The WP2P is a wireless alternative to a six core cable.

The system comprises two WP2P modules, each with three switched inputs and three relay outputs.
The units can be located up to two kilometres apart from each other and allow you to remotely control electrical devices connected to either end of the system.

When a switch input is closed on one of the WP2P modules, then, the corresponding relay will close on the other WP2P module, and vice versa. 

There is no programming or configuration, simply connect the power and go.

pdficon_small.gif Click for Brochure

pdficon_small.gif Click for Quick Start Guide

Or click here for application examples

The WP2Ps do not come with DC power supplies or DC power cables, please select the most suitable option for your application.

Contact Us

Phone  03 366 3713

link_w.gif Enquiry Form