SMS Controller (Quad Band)

The QTech SMS Controller uses SMS/text messages to provide multiple people with alarms, status conditions and the ability to control devices (and receive a confirmation SMS) - all from your smart phone.
The SMS Controller shown here supports quad band communications for Spark XT, Vodafone, and 2Degrees.

 Click for Datasheet

 Click for User Manual

Click here for application examples

Click here for the latest firmware (V3.01) Updated June 2018
Refer to User Manual for firmware upgrade procedure.

Messenger Configuration Software ("SMS Messenger Workbench" V1.5.8) Updated April 2017
SMS Messenger Workbench V1.5.8 may be used to upgrade the firmware on all SMS Controllers but must only be used for configuring SMS Controllers with firmware version 2.06 or later. Please ensure your firmware is at V2.06 (or later) before attempting to configure your SMS Controller.

Windows USB Driver - please install this after installing Messenger, but before connecting to a SMS Controller.

 SMSC Success Stories and Uses
 

Key Features Include:

• Class leading intuitive user interface software
• SMS Controller to SMS Controller texting. Multiple controllers can text each other allowing you to build a network.
• Text the SMS Controller "status" to receive the current I/O status
• Count flow pulses and provide a daily total to your phone
• Multiple I/O: Digital inputs x8, Analog Inputs x2, Digital outputs x8, Analog outputs x2
• Up to 10 people can be added to the address book
• Up to 4 actions can be taken per I/O point
• USB programming
• Forgotten the message format? Simply text the SMS Controller for a list of available commands
• Pulse output for digitals - text "Pulse" for a 1 second output, perfect for overload/reset applications

_{All QTech products may be subject to delivery advice when ordered.}